TRENDnet Launches Its TPE-S80 & TPE-S160 PoE Switches
Providing up to 15.4W per port (with 250W total power budget for the TPE-S160) that can be mounted on a standard 19-inch rack, both switches incorporate auto-sensing PoE technology that cuts power to non-PoE connected devices.
Following the release of its PoE+ Injector and PoE Splitter (TPE-114GS), TRENDnet is announcing its 8-Port 10/100Mbps PoE Switch (TPE-S80), and 16-Port 10/100Mbps PoE Switch (TPE-S160).
TPE-S80. (Image source: TRENDnet.)
Providing up to 15.4W per port (with 250W total power budget for the TPE-S160) that can be mounted on a standard 19-inch rack, both switches allow non-PoE devices to connect to the them. Auto-sensing PoE technology cuts power to non-PoE connected devices. Simply use TRENDnet's PoE Splitter with any of the two switches to install non-PoE devices in remote locations.
TPE-S80 at a glance:-
- IEEE 802.3af Power over Ethernet (PoE) compliant
- 8 x 10/100Mbps Auto-MDIX RJ-45 PoE ports
- On/Off power switch
- Provides 15.4W per PoE port
- Supports PoE Powered Device (PD) classification
- 1.6Gbps switching fabric
- Full wire-speed non-blocking reception and transmission
- Store-and-forward switching method
- Back pressure Flow Control for half-duplex mode
- IEEE 802.3x Flow Control for full-duplex mode
- 512Kbits RAM Data Buffer and 1K MAC address entries
- Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)
- Plug and Play
- Sturdy metal enclosure
- Mounting hardware included
TPE-S160 at a glance:-
- 16 x 10/100Mbps Auto-MDIX RJ-45 PoE portsOn/off power switch
- IEEE 802.3af Power over Ethernet (PoE) compliant
- Supports PoE Powered Device (PD) classification
- Provides 15.4W per PoE port
- 3.2Gbps switching fabric
- Full wire-speed non-blocking reception and transmission
- Store-and-forward switching method
- Back pressure Flow Control for half-duplex mode
- IEEE 802.3x Flow Control for full-duplex mode
- 1.5Mbits RAM Data Buffer
- 4K MAC address entries
- Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)
- Plug and Play
- Sturdy 19-inch wide metal enclosure
- Rack mounting hardware included
Both PoE switches come with a 3-year limited warranty, and are priced at S$300 (TPE-S80) and S$580 (TPE-S160).
Our articles may contain affiliate links. If you buy through these links, we may earn a small commission.