TRENDnet Releases Its Latest PoE+ Injector & PoE Splitter


TRENDnet Releases Its Latest PoE+ Injector & PoE Splitter

TRENDnet is introducing its PoE+ Injector (TPE-115Gi), and PoE Splitter (TPE-114GS) to the Singapore market.

PoE+ Injector

The TPE-115GI combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100m to network PoE+ or PoE devices. The integrated power supply reduces installation clutter. Auto sensing technology delivers up to 30W to 802.3at PoE+ devices or 15.4W to 802.3af PoE devices.

No need for a PoE switch - use an existing port from a non-PoE switch to save installation and equipment costs when installing PoE access points and IP cameras in remote locations.

At a glance:-

  • IEEE 802.3at PoE+ (30W) compliant
  • Backwards compatible with IEEE 802.3af PoE (15W) devices
  • Automatically supplies a PoE+ (30W) or PoE (15.4W) connection to the device
  • Integrated power supply
  • Network devices for distances of up to 100m
  • 1 x 10/100/1000 Mbps Auto-MDIX Data In port
  • 1 x 10/100/1000 Mbps PoE+ Auto-MDIX Data Out port
  • Power port with LED indicator
  • Easily install a PoE+ or POE device where a power outlet is not available
  • Reduce installation and network equipment costs
  • Safeguards network devices with short circuit protection

PoE Splitter

The Gigabit Power over Ethernet Splitter, model TPE-114GS, is used to install non-PoE devices in remote locations. It splits a networked PoE signal into separate power and Gigabit data sources. Run an Ethernet cable from a Gigabit PoE switch (or injector) for distances up to 100m and then split the PoE signal into separate Gigabit data and power sources in order to network a non-PoE device.

No need to install non-PoE devices near a power outlet. Save installation and equipment cost when installing access points, IP cameras, and more in a remote location. A handy toggle switch adjusts output power to 5V, 7.5V, 9V, or 12V in order to match non-PoE device power requirements. This compact splitter safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non-PoE network at Gigabit speeds.

At a glance:-

  • Converts non-PoE devices with Power over Ethernet support
  • 1 x 10/100/1000Mbps PoE Auto-MDIX Data In port
  • 1 x 10/100/1000Mbps Auto-MDIX Data Out port
  • Power out port
  • 1 x 33cm (13-inch) jumper cable with a 2.0mm connection to the splitter and 2.0mm pin connection to powered device
  • 1 x 33cm (13-inch) jumper cable with a 2.0mm connection to the splitter and 2.5mm pin connection to powered device
  • For a product with a 1mm pin power connection, use this product with TRENDnet’s TV-JC35 (3.5mm to 1mm Jumper Cable)
  • Power LED indicator
  • Install non-PoE devices where a power outlet is not available
  • Reduce installation and network equipment costs
  • Safeguards network device with short circuit protection
  • Adjustable output DIP switch 5V, 7.5V, 9V, and 12V adjustable output
  • Auto-sensing power drawn from 802.3af power source equipment(PSE) devices
  • Supplies power up to 15.4W
  • Light weight and compact size
  • Wall mounting points

Backed by a 3-year limited carry-in warranty each, the TPE-115GI and TPE-114GS are retailing for S$69 and S$49 individually. (Service centre is at Convergent Systems (S) Pte Ltd, 9 Ubi Crescent, (S)408572.)

All images accredited to TRENDnet.

All News Categories

News for Past 12 Months

Subscribe to HWZ Here!

Subscribe now to receive latest tech news, articles and promotions straight to your inbox!
 
 
By signing up, you indicate that you have read and agreed to the and .