Datapath Announces Datapath x4


Datapath Announces Datapath x4

Datapath has announced the availability of its new stand alone video wall Controller and multi display adapter, the Datapath x4. The Datapath x4 accepts a standard single or dual link DVI video signal up to 4k x 4k resolution and provides four display outputs. Each output can arbitrarily view any part of the input image and apply frame rate conversion, up scaling, cropping and optional rotation for portrait display formats.

The Datapath x4 offers a flexible low cost way of building video walls. The Datapath x4 enables complex display wall arrangements for any mixture of landscape and portrait display formats. For larger video walls multiple units can be combined together or used with Datapath’s Image4 graphics card to support up to 160 displays.

For digital signage applications the Datapath x4 provides ease of installation and setup with no need for on location programming.

Each of the four outputs can be driven as DVI or analog RGB, and can represent an arbitrary crop region of the original input image. The output resolution and frame rate does not need to be related to that of the input as the Datapath x4 will optionally upscale and convert frame rates, each cropped region independently. However, if the Datapath x4 detects that frame rates identically match, it will automatically genlock. Additionally, each output can be independently mirrored or rotated through 90°, 180° or 270° to support creative mixes of landscape and portrait monitors. The unit also supports bezel correction and overlap for edge blending projectors.

At high resolution, DVI signals cannot normally be guaranteed beyond 5m cable interconnects due to the nature of the signal losses inherent in the DVI cables and connectors. Datapath have added active equalization hardware on the input to the x4 which is able to compensate for these losses and support cable lengths, of up to 20m even at full dual-link resolutions (330MHz pixel clocks). Lower resolutions will allow even longer cable lengths.

Additionally, because different manufacturer’s cables can differ greatly in terms of losses, the Datapath x4 control application allows user configuration of the equalization levels, to guarantee that any combination of input cable length and cable type can be adjusted for optimum quality.

This design improvement will allow more flexible positioning of the x4 controller relative to the source computer and the displays. With 5m output cables from the x4 to the monitors, it is possible to achieve a 25m span from the source to the display without the need for costly DVI extender hardware.

Key features of x4:

  • Splits a single DVI input into 4 independent monitor outputs
  • Accepts Dual Link DVI, Single Link DVI or HDMI input
  • Flexibly drives four displays, each from any selected region of the input image
  • Supports both DVI and analog RGB output monitors
  • Multiple units can be used for larger wall configuration

 

The Datapath x4 also comes with a three year warranty, and effective customer support options. To find out more download the full product specification at www.datapath.co.uk

All News Categories

News for Past 12 Months

Subscribe to HWZ Here!

Subscribe now to receive latest tech news, articles and promotions straight to your inbox!
 
 
By signing up, you indicate that you have read and agreed to the and .