News
News Categories

Club 3D Introduces Its MST Hub

By Joy Hou - on 12 Apr 2013, 3:55pm

Club 3D Introduces Its MST Hub

Club 3D has announced its Multi Stream Transport (MST) hub.

Image source: Club 3D

The device allows you to add more display devices to an existing desktop or mobile systems fitted with a DisplayPort output. Utilizing extreme high bandwidth signal from a DisplayPort 1.2 output and splitting this signal to three separate signals with own DisplayPort outputs, it lets you conveniently add up to 3 VGA, DVI, HDMI, or DisplayPort display devices to your set-up. These display devices can be connected using passive adapters.

A quick look at the MST's features:-

  • Standards compliance/support: DisplayPort v1.2, DisplayPort v1.1a,VESA DDM
  • Standard, HDCP V2.0, DisplayId, and EDID V1.4
  • Supports main link rates of 5.4 bps(HBR2),2.7 bps(HBR)and 1.62 bps(RBR) from source
  • Supports 1/2/4 lanes of main link for RX side
  • Supports three DP++ output port,or two dual-link DVI ports,or the combination of ports
  • For DP 1.2 source,supports DP1.2 MST multi video/audio steams
  • Supports 1.1 source,supports ViewXpand
  • Supports DP-DP Bypass mode
  • Supports AUX-CH enables SBM and I2C mapping over AUX between the source/sink and device
  • Dedicated I2C slave for main processor to access the device
  • Supported output resolution:up to 2560X1600@60Hz each monitor in DP1.2 MST and up to FHD/1080p in DP1.1 or DP 1.2 SST
  • Input pixel data depth 6/8/10/12 bits and supports output pixel format RGB444
  • Works best with AMD graphics cards
Join HWZ's Telegram channel here and catch all the latest tech news!
Our articles may contain affiliate links. If you buy through these links, we may earn a small commission.